• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

HEADPHONE GRAPH

Honest Reviews for Top Products

  • Audiophile Headphones
    • Best Audiophile Headphones For Gaming
    • Best Budget Audiophile Headphones
    • Best Entry Level Audiophile Headphones
    • Best Portable Audiophile Headphones
    • Best Over The Ear Headphones For Working
    • Best Headphones For Teenager
    • Best Headset For Truckers
  • BUYERS GUIDE
    • How To Straighten Headphone Wires In 2023 (Complete Guide)

Why Does My Jbl Headphones Keep Turning Off

By Ella | Last Updated January 21, 2023

There could be a few reasons why your JBL headphones are turning off. Some possible causes include:

Why Does My Jbl Headphones Keep Turning Off Step By Step :

Step 1 : Low battery: Make sure your headphones are fully charged or have fresh batteries.

Step 2 :Automatic power-saving feature: Some headphones have a feature that automatically turns off the power after a certain period of inactivity to conserve battery life.

Step 2 : Connection issues: Make sure your headphones are properly connected to your device and that the connection is stable.

Step 3 : Defective hardware: If the above steps do not solve the problem, it is possible that the headphones have a hardware issue that needs to be resolved by the manufacturer.

Step 4: Firmware issue: sometimes there might be a firmware issue that causing the problem, check for any available firmware updates for your device.

It would be best if you check the manufacturer’s website or contact the manufacturer’s customer support for more information on troubleshooting and resolving the issue.

By Ella | Last Updated January 21, 2023

How To Find Your Airpod Case Without Pods [ 6+ Easy Solutions ] 2023

By Ella | Last Updated January 9, 2023

How To Find Your Airpod Case Without Pods

Do you have a habit of misplacing your AirPods? This article will tell you How To Find Your Airpod Case Without Pods on an Apple device. The Apple Airpods are a great invention that has made our lives easier. The only problem is they are so small and can get lost easily. It’s not hard to find them if you know where to look, but if you don’t, then it’s a challenge.

Apple’s AirPods are wireless earbuds that can be used as a hands-free headset for making and receiving phone calls, listening to music, or watching videos. You can also use Siri with the AirPods.The AirPods are very small and easy to lose track of. You may have left them in your office or at a friend’s house, but now you need them at work or home. How do you find them?

If you don’t have your AirPods with you and need to find them, there are a few things you can try. First, check the last place you had your AirPods before they disappeared. If you left them in the car, check your pockets or other places where they could have fallen out of your bag. If they were on the kitchen counter, check the floor and under the furniture.

The second thing to try is to use Find My iPhone on iCloud or Google Maps on Android devices to locate them if they were connected to an Apple device or Android device at some point. The final thing to do is to use the Find my iPhone voice command.”Hey Siri, find my AirPods.” Let’s find more solutions in this super in-depth guide.

How To Find Airpods Case ?

Apple’s AirPods are a great pair of wireless earphones, but they come with no way to store them. Luckily, there are many different ways to find your AirPods case without pods. Here’s how to easily locate it without spending money on new pods.

Use Find My iPhone App to Find Your Airpod Case

If you have an iPhone or iPad, then the Find My iPhone app can help you find your AirPods case.

Step 1: All you need is your Apple ID and password to log in. So log in using your Apple ID.
Step 2: Once logged in, click on the Find My iPhone tab and select the “All Devices” option. This will show a list of all of your devices that are registered with iCloud including any lost or stolen ones that have been reported as missing.
Step 3: Scroll down through this list, you should see a button called “Play Sound” next to the device that has been lost or stolen. Clicking this button will cause the sound from the lost or stolen device to play for about five minutes before stopping automatically after five minutes.

Apple has done more than enough to make sure that the AirPods case is easy to find. If you don’t want to go through the hassle of finding your AirPods case, you can buy an official replacement pair.

Use Airpod Finder App (Third-Party)

Airpod finders are now available for purchase. AirPod Finder is a device that helps you find lost AirPods. It has a built-in Bluetooth locator and app to find your AirPods, even if they’re not in the same room as your phone. The device also has an alarm that goes off when you’re within 10 meters of your lost AirPods.

Use the AirPods Case App to Find Your Lost AirPods Case

The AirPods Case app is a free app that can help you find your lost AirPods case. It can sense when the case is nearby and will use a map to show you where it is.

This app is great for people who have lost their AirPods case and are looking for it. It uses the phone’s sensors to detect whether or not the case is nearby, and then it will use GPS to show you where it currently is on a map.

Check the Charging Dock

You might have left the charger in the dock or your docking station or on your nightstand. Remember that your charger is usually next to where you charge your iPhone.

Check Your Nightstand

If you’ve set down your pods without putting them back in their charging cases, they might be there by now! Put this place at the top of your list if you charge them there each night.

Check Your Desk

If you have a desk and don’t use it all the time, odds are your pods are there now! Put this place at the top of your list if you charge them there each day.
More Tips To Find Lost Airpod Case
The first thing you should do is to make sure that you are looking for the right case. There are two kinds of cases: hard and soft. If you have a hard case, then it is easy to find your AirPods inside because the hard case will provide a lot of protection for your AirPods. However, if you have a soft case, then it will be more difficult to find your AirPods because the soft case does not offer as much protection as the hard one does.

The second thing you should do is to check all of your pockets and bags in order to make sure that they are not there. You can also ask other people if they can help you look for them. Finally, if you are still unable to find them and are pretty sure that they have not dropped out of your purse or bag, then you should try looking for the case itself.

How To Find Airpods Without Find My iPhone ?

The AirPods are an expensive accessory. If you don’t have “Find My iPhone” installed on your phone, you can use an Android app to find it. But first, let’s make sure that your AirPods are paired with your phone. After pairing the AirPods with your phone,

open the Apple App Store and download “Find My iPhone.” Now that you have “Find My iPhone” installed on your phone, open it and sign in with the same Apple ID as the one used to purchase the AirPods. This will allow the app to locate them through Bluetooth or Wi-Fi.

How To Find My Airpods Case On Android ?

If nothing works for you, there are a few other ways to find lost AirPods on Android:

  • You can use an Android app called “Finder for iOS and Android”. This is a free service that uses GPS or Wi-Fi signals from both devices to track down any lost device within 100 feet of where they were last in contact.
  • Finder for iOS and Android is a free service that uses GPS or Wi-Fi signals from Bluetooth devices to find lost items.
  • The app can be downloaded on both Android and iOS devices. It has a very simple UI with a search bar at the top and a list of items in the middle of the screen.
  • The user should first turn on their Bluetooth, enter their phone number, and then select what they are looking for. The app will then show them where the item is on a map as well as its distance away from them.

How To Find Your Airpod Case Without Pods FAQs :

Can You Track AirPod Case Without Pods?

You can locate your misplaced AirPod case, definitely. That is if Apple’s Find My App can locate at least one of your misplaced AirPods in their charging case. You’ll have to rely on items like AirTags or other tracking methods without your AirPods in the missing case. Up to 40 feet away, AirPods may be followed, but as soon as they leave that range, they vanish. Additionally, the thief may quickly sync them to their own iPhone, making them more difficult to locate using your smartphone.

What if I Lost My AirPods Case?

In some cases, you lose your AirPods outside and you feel you cannot find them back. There is also a solution to this problem. The Replacement Airodp Case, the Left or Right AirPod, or both, are available for purchase. Your successor will be brand-new. Therefore, Apple will replace your lost item for a charge of $59 to $99 USD if (and when) you lose your AirPod Charging Case. That replacement AirPod case is either brand-new or performs and is as reliable as new.

How to Find AirPods if the Battery is Dead and No Charger is Available

One of the most common problems that people face with AirPods is not having a charger to connect the device to. This is where a lost charger can be a big problem. Some people have found that their AirPods are not charging when they plug them in. If you are one of these people, then you need to find a way to charge your AirPods without the charger.

There are many ways that you can do this, and we will go over some of them here:

-You can use your laptop or computer as an AirPod charger
-You can use another phone or tablet as an AirPod charger
-You can use any USB port or power bank as an AirPod charger
After reading this guide, you will be able to find your AirPods case without pods.

By Ella | Last Updated January 9, 2023

Moto Z Force Headphone Adapter Not Working ? (Complete Guide 2023 )

By Ella | Last Updated January 9, 2023

Hello People! As it is 2022, technologies have changed. Phones are launching without a headphone jack. Similarly, Moto Z force does not contain any jack and works with an adaptor. If the Moto Z Force Headphone adaptor not working as well, then you are screwed.

Don’t worry; we got your back!

To get a better sound quality, it is advisable to connect it through headphones to listen to each sound. But the phones without headphone jacks need an adaptor to work properly. The adaptors have a USB cable, which helps to provide the headphone port on the other end. The 3.5mm headphone port is on the other side of the connector.

Moto Z Force Headphone Adapter Not Working?

Moto Z Force Headphone Adapter Not Working ?

Now, If you made the connection and can’t hear any sound, there is probably some mess in the adapter. The USB port used for Moto Z force is type C, which is unique among others. There might be a chance that it is causing the problem.

Instead of buying the new wireless air buds or changing the wired headphones, all the connections must be checked before getting plugged in to properly working headphones.

Unavailability of the headphone port in Moto Z Force:

First, here are some details on the unique design of Moto Z Force. The new and updated model of Moto Z Force has no port for a 3.5mm jack. It would be best if you had the connector to connect the headphones while playing the game or attending the meeting. Bluetooth headphone is not a good option as it compromises the sound quality.People of this modern era know wired headphones provide the best sound quality.

You know,

Our team of engineers has done the proper research regarding this problem. So, in this article, we will tell you about the possibilities of not working adapter with their solutions.

What are the possibilities of the Moto Z Force Headphone Adapter not working?

There might be many reasons for the Moto Z force Headphone is not working. We are going to discuss them one by one below:

Dust/ Debris Issue:

The prevailing reason for not working the headphone jack is the dust stuck inside the 3.5mm Jack. Or there is a chance of chance o dust in the USB port as well. It affects the functioning of the connection.

To solve this problem of non-functioning adapter, just a simple trick is needed. Blow the Jack of the Moto Z Force adapter, and it will remove the dust particles. Your connection is all set and complete.

Change the connector:

After checking the blowing away dirt technique, you can go out and buy the new connector. Buying a new connector is more economical than buying new headphones.

Sometimes the connector shows an error as well. It may get loose by making the connection again and again. It may get loose from the USB side of the jack side.

Also, the connector gets damaged by placing it randomly when not in use. It can damage the small wired inside the connector. So, if your Moto Z Force Headphone is not working, get the new connector as your old one is not making the strong connection.

Fault in headphones wire:

If your headphones are not providing you with the sound after making the connection with Moto Z Force, it means you need to replace the headphones. But make sure to check the headphones again with other devices as well.

There is a possibility that the Headphone’s wire is damaged that’s why the connection is lost. It happens when you place your headphones on irregular surfaces or in the drawers where a bundle of wire is already present—curling and twisting the headphone wire damage the small cable inside it.

Non-compatibility of the Headphone and the phone:

It is the most important issue of headphones that don’t work properly, as compatibility matters the most. If your phone does not show compatibility with the headphones or connector, it means you have wasted your money.

Ensure the compatibility of phone and Headphone, and Headphone and the connector. Else your Moto Z force headphone adapter won’t work.

Restart your headphones:

Once you make the connection and see your adaptor is not working, it means you need to give a fresh start to your headphones. Turn off your headphones by pressing the power button and then turn them on after a few seconds.

Why are there no headphones Jack, in new models of the phone?

The latest technology and famous mobile phone companies try to make life easy with less mess. They are removing the headphone jack to switch to wireless technology. It includes Screen mirroring, Bluetooth connection, and other options, etc.

No doubt, these are advanced techniques, but they somewhat affect the sound quality compared to wired sound devices. For better sound quality for your meetings and online classes, you need the headphone adapter to make the connection.

Moto Z Force Headphone Adapter Not Working FAQs :

Why does my headphone jack not work?

Ans:  Most probably because of the dust issue, your headphone jack is not working. Also, if your phone is not waterproof and you dipped the headphone jack in water, it will not work at all.

The other issue due to which your headphone jack is not working is the audio setting on your phone. If the device audio settings are not adjusted, your headphones won’t work.

Does Moto Z Force have a headphone jack?

Ans: No, Moto Z Force has no headphone jack. It is an updated model, and it lacks the headphone port. It is designed with class and competes with popular Android and iPhone models. To connect the phone and headphones, you need the connector cable.

Conclusion :

Wrapping up the above discussion, you need to consider all of the above possibilities for your Moto Z Force Headphone Adaptor to check it’s working. All these are easy to find techniques that won’t cause any problems. In case you wonder, I hope this article was helpful to you! if you want to read a review of top  Best Headset for Zoom Meetings

Check out our Best Audiophile Headphones For Gaming reviews if you want to learn more :

By Ella | Last Updated January 9, 2023

How To Straighten Headphone Wires In 2023 (Complete Guide)

By Ella | Last Updated January 25, 2023

Fellas! Do you often worry about your headphones and think about “how to straighten headphone wires”? Because you don’t want to give any damage to this expensive accessory.

Twirling starts, When you first buy the headphones and place them on different surfaces, you drag out the cable from the bundle of wires and expect it to work fine, which is an unexpected case.

But don’t worry, it’s 2022.

Don’t spend hours untangling the headphone wire, as it is so easy to handle. We brought you the best possible solution to keep your headphone wire straight because we know how exhausting it is to untangle the wires. In case you are wondering, let us clear your head!

Why does the headphone wire start to twist?

The wires are flexible and are built to move in any direction for the user’s comfort. One can easily put on the headphones and start enjoying a movie or a song, no matter their position. Whether you are lying, sitting, or walking, headphones will provide quality time. So, for this purpose, the wires start to mess around themselves and twirl.

It can damage the wire and lower the quality of the sound. It can also drop down the sound if twisted badly.So don’t buy the new ones; keep your old ones safe!

How To Straighten Headphone Wires

How to Straighten Headphone Wires?

 Once your headphone cable is twisted, straightening it isn’t difficult. You can use alternate and safe methods to get your headphones back as new as you bought them for the first time.

Our experts have concluded a few tips to keep your headphone wire straight. All these ways are simple and affordable.

Take a look below:

Place the headphones on the stand when not in use:

After you see your headset wire starts to curl up, pull the cord with your hands. Make it straight, and then hang it on the lightweight stand. Don’t forget to put the headphones back on the stand after using them. It will keep the wire straight as long as you want.

Place some weight on the wire:

It is quite a simple way which costs you nothing. Grab something which seems a little heavy. Straight the wire and place the heavy object on the straightened wire. Keep the weight overnight.  After some time, you will notice your wire is straightening up. Remove the weight, and you will be amazed by the result.

Use of fingers:

The quick and easy perform process to straighten the headphone wire is to wrap the wire around your fist. Start to pull it gently through your hands. Repeat this process 5-10 times. Or hold the wire between your index finger and thumb and start to pull it softly.

Both the ways mentioned above help straighten the headset wire from twisting around.

Use of hairdryer:

You are stressed out about the twisting of your headphone wire cable again and again. Don’t worry. Take out your hairdryer and set it to the lowest speed.

Heat the cable with little heat from the hairdryer, and it is all ready to be molded back in its original position. The soft cables inside the wire can go back to their natural shape using heat.

How to stop the wire from twisting?

To prevent the headset’s wire from curling or getting damaged; Pass the wire through the cord holder and hang it through the space. Stick the cardholder to your PC, laptop table and pass the wire of your headphones through the cord holder hole. It helps to increase the life of your headphones as they are not straight position and not tangling up with the other mess.

Other ways to save the headphone wires include folding the wire when not in use and clipping it before placing it in the drawer or keeping it straight, placing it in a separate drawer.

When not using the headphones, you can place the headphones in a separate carry case; it also stops the wire from twisting around other cables in the same drawer

How To Straighten A Wire Headphones :

To straighten wire headphones, you can try the following methods:

  1. Gently pull on each end of the wire to stretch it out. Then, hold the wire by the ends and use your fingers to gently manipulate the wire, running your fingers along the length of the wire to smooth out any kinks or twists.
  2. Drape the coiled wire over a cylindrical object such as a pencil or pen and let it sit overnight to let it shape itself.
  3. Fill a container with warm water, immerse the coiled wire in it for 5-10 minutes, and then gently pull on each end of the wire to stretch it out.
  4. Use a hairdryer to heat up the wire, then gently pull on each end of the wire to stretch it out.

It is important to be gentle when straightening the wire to avoid damaging or breaking it.

Note that some headphones come with a memory wire, which is meant to maintain its coiled shape, so the wire will return to its coiled shape if stretched out.

How To Straighten Coiled Headphone Wires :

One way to straighten coiled headphone wires is to gently pull on each end of the wire to stretch it out. Then, hold the wire by the ends and use your fingers to gently manipulate the wire, running your fingers along the length of the wire to smooth out any kinks or twists. Another method is to draping the coiled wire over a cylindrical object such as a pencil or pen and let it sit overnight to let it shape itself.

How To Straighten Headphone Wires FAQs :

How do I straighten my headset wire?

Ans: Simple and efficient method to straighten your headset wire is by using your fingers. It works when you pull the wire through your hand while holding it tight between your fists. Slowly pass the wire through your thumb and index finger. It is also the most economical way to straighten the headphone wire.

How do I stop my headphone wires from curling?

Ans: By putting some weight on the cord of your headset will help in the prevention of curling. The second way is hanging the headphones on the stand when not in use.

You can also store the headphones in the case after using them. It increases life and keeps them safe.

How do you straighten audio cables?

Ans: Audio cables are thin cables that curl up easily. It is a simple procedure to straight them which includes:

  1. Tie the one end of the cord with some fixed object
  2. Pull out the cord with little force
  3. Move your hand on the hand and gently pull it
  4. Repeat the process 10-15 times
  5. Then do this process from the other end as well

there are other ways, like putting some weight over it, pulling it gently between the hand and hairdryer technique.

Check out our Best Budget Headphone reviews if you want to learn more :

Related You can also read:

  • Moto Z Force Headphone Adapter Not Working

By Ella | Last Updated January 25, 2023

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Facebook
  • LinkedIn
  • Pinterest
  • Twitter

I’m Ella. Headphonegraph is an independent online tech magazine serving the global headphone market. Our site displays the newest and most stylish headphones in the market for headphone lovers.

Recent Posts

  • Why Do My Wired Headphones Keep Disconnecting [ Step By Step ]
  • Why He Got His Headphones Over His Hoodie
  • Why Do You Wear Headphones When Recording A Podcast
  • Why Wear Headphones When Recording Podcast
  • Don’t Hike With Headphones Blog

Footer

  • ABOUT US
  • CONTACT US
  • AFFILIATE DISCLOSURE
  • TERMS OF SERVICES
  • Disclaimer
  • PRIVACY POLICY
  • Facebook
  • LinkedIn
  • Pinterest
  • Twitter
  • ABOUT US
  • CONTACT US
  • AFFILIATE DISCLOSURE
  • TERMS OF SERVICES
  • Disclaimer
  • PRIVACY POLICY

Copyright © 2022 Ella , LLC: A participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are compensated for referring traffic and business to Amazon and other companies linked to on this site.