Fellas! Do you often worry about your headphones and think about “how to straighten headphone wires”? Because you don’t want to give any damage to this expensive accessory.
When you first buy the headphones and place them on different surfaces, you drag out the cable from the bundle of wires and expect it to work fine, which is an unexpected case.
But don’t worry, it’s 2022.
Don’t spend hours untangling the headphone wire, as it is so easy to handle. We brought you the best possible solution to keep your headphone wire straight because we know how exhausting it is to untangle the wires. In case you are wondering, let us clear your head!
Why does the headphone wire start to twist?
The wires are flexible and are built to move in any direction for the user’s comfort. One can easily put on the headphones and start enjoying a movie or a song, no matter their position. Whether you are lying, sitting, or walking, headphones will provide quality time. So, for this purpose, the wires start to mess around themselves and twirl.
It can damage the wire and lower the quality of the sound. It can also drop down the sound if twisted badly.So don’t buy the new ones; keep your old ones safe!
How to Straighten Headphone Wires?
Once your headphone cable is twisted, straightening it isn’t difficult. You can use alternate and safe methods to get your headphones back as new as you bought them for the first time.
Our experts have concluded a few tips to keep your headphone wire straight. All these ways are simple and affordable.
Take a look below:
Place the headphones on the stand when not in use:
After you see your headset wire starts to curl up, pull the cord with your hands. Make it straight, and then hang it on the lightweight stand. Don’t forget to put the headphones back on the stand after using them. It will keep the wire straight as long as you want.
Place some weight on the wire:
It is quite a simple way which costs you nothing. Grab something which seems a little heavy. Straight the wire and place the heavy object on the straightened wire. Keep the weight overnight. After some time, you will notice your wire is straightening up. Remove the weight, and you will be amazed by the result.
Use of fingers:
The quick and easy perform process to straighten the headphone wire is to wrap the wire around your fist. Start to pull it gently through your hands. Repeat this process 5-10 times. Or hold the wire between your index finger and thumb and start to pull it softly.
Both the ways mentioned above help straighten the headset wire from twisting around.
Use of hairdryer:
You are stressed out about the twisting of your headphone wire cable again and again. Don’t worry. Take out your hairdryer and set it to the lowest speed.
Heat the cable with little heat from the hairdryer, and it is all ready to be molded back in its original position. The soft cables inside the wire can go back to their natural shape using heat.
How to stop the wire from twisting?
To prevent the headset’s wire from curling or getting damaged; Pass the wire through the cord holder and hang it through the space. Stick the cardholder to your PC, laptop table and pass the wire of your headphones through the cord holder hole. It helps to increase the life of your headphones as they are not straight position and not tangling up with the other mess.
Other ways to save the headphone wires include folding the wire when not in use and clipping it before placing it in the drawer or keeping it straight, placing it in a separate drawer.
When not using the headphones, you can place the headphones in a separate carry case; it also stops the wire from twisting around other cables in the same drawer
How To Straighten Headphone Wires FAQs :
How do I straighten my headset wire?
Ans: Simple and efficient method to straighten your headset wire is by using your fingers. It works when you pull the wire through your hand while holding it tight between your fists. Slowly pass the wire through your thumb and index finger. It is also the most economical way to straighten the headphone wire.
How do I stop my headphone wires from curling?
Ans: By putting some weight on the cord of your headset will help in the prevention of curling. The second way is hanging the headphones on the stand when not in use.
You can also store the headphones in the case after using them. It increases life and keeps them safe.
How do you straighten audio cables?
Ans: Audio cables are thin cables that curl up easily. It is a simple procedure to straight them which includes:
- Tie the one end of the cord with some fixed object
- Pull out the cord with little force
- Move your hand on the hand and gently pull it
- Repeat the process 10-15 times
- Then do this process from the other end as well
there are other ways, like putting some weight over it, pulling it gently between the hand and hairdryer technique.
You can also read
- Moto Z Force Headphone Adapter Not Working
- Best Audiophile Headphones For Gaming
- Best Budget Audiophile Headphones